Nanan Wenjin Scrap Metal Recycling Co., Ltd.

SIX SERVICES, ONE MEASURED SCRAP SCALE

Every load is weighed, lifted and pressed to a standard.

Nanan Wenjin Scrap Metal Recycling Co., Ltd. runs its yard as a single integrated instrument, with six services that follow one load from the gate to the gate again. This page describes each service in detail so that customers and partners understand exactly what is measured, who signs it and which log holds the record. Arrange a visit

The yard is located at No. 207 Jinge Xintang Village, Matou Town, Nanan - 362000, China (CN). Our process is deliberately ordered: nothing is pressed before it is weighed, and nothing leaves before it is logged.

Book a yard walkthrough

THE SIX YARD SERVICES

What each measured stretch delivers

Each service is run by a named crew and closed with a written log. Together they form the scrap scale that customers rely on.

Ticket Bay Desk

The ticket bay desk is the first measured contact between a customer and the yard. A vehicle is directed onto the deck, the scale is zeroed in front of the driver and the empty tare is captured to the kilogram. The desk then issues a carbon-copy weigh ticket that carries the haul code, the customer reference and the net estimate. That ticket is not a receipt for courtesy; it is the identity of the load for the rest of the scale.

The desk supervisor is responsible for resolving mismatches while the truck is still present. If a delivery note disagrees with the ticket, the vehicle is re-weighed rather than allowed to proceed with a doubtful figure. Copies are scanned into the yard system and the paper original is filed against the day. By the end of the shift, every ticket raised at the desk has a matching entry in the digital record, which is what allows traceability right through to the baler and the load band.

Magnet Bay Rounds

Magnet bay rounds are where the yard does its heaviest lifting. An operator drives the overhead crane and walks a controlled route around the sorting bay with the electromagnet, picking ferrous offcuts from the concrete and dropping them into the skip hopper. Each round is a timed pass rather than an open sweep, so that the lift remains predictable and the hopper is never overloaded beyond what the next stage can accept.

Every round is logged as its own entry: the operator, the bay section, the hopper target and the approximate tonnage. Mixed loads discovered during a round are split and flagged before the baler so that grades are not blended by accident. By the time the magnet returns to its park position, the crew has a written record of what was lifted and where it came from, ready to reconcile against the opening ticket.

Baler Weeks

Baler weeks are the long-form press campaign that gives the yard its saleable output. Across a week the crew runs the baler on a planned schedule, logging each press cycle, the bale count and the density trend. The row log is reviewed daily, and soft bundles are re-pressed rather than shipped, because a dense block is what the dock pays for and a loose one costs the yard twice.

Baler weeks are sequenced with dispatch so that the press never produces faster than the dock can clear. The supervisor records press hours, hydraulic pressure checks and any blade changes in the same log, which turns a week of noisy work into a clean, auditable record. Customers who want to understand how their scrap becomes a bale can ask for the baler week summary that covers their delivery.

Scale House Days

Scale house days are the reconciliation sessions that keep the whole yard honest. Once a day series is complete, the scale house compares every weigh ticket against the baler log and the dispatch record, confirming that gross, tare and net agree and that no load has been double-counted. The instruments are zeroed and calibrated on schedule, and any drift found during the check is corrected before the next vehicle is admitted.

This quiet, methodical work is the backbone of trust in the trade. When a customer asks why a figure changed, the scale house can walk through the original ticket, the lift entry and the press row in order. A discrepancy is never allowed to sit unresolved overnight, because an unclosed gap in the numbers is how a yard loses its reputation.

Shear Check Sessions

Shear check sessions prepare heavy and oversized scrap before it reaches the baler. A trained crew inspects the shear blades, checks the hydraulic lines and confirms that the planned size reduction will produce bale-ready pieces. The session is short but decisive, because a dull blade or a leaking line can jam the baler and put an entire week of press output at risk.

Each check is recorded with the date, the blade condition, the pressure reading and the sign-off of the operator. If a defect is found, the shear is taken out of service and the log shows the stoppage, the repair and the return. The same log is referenced during scale house reconciliation, so that the tonnage processed in a shear check session reconciles with the bales produced that week.

Yard Run Evenings

Yard run evenings close the operating day with a deliberate walk across the deck. After the last ticket is printed and the last bale is weighed, the crew clears loose scrap from the concrete, parks the magnet, checks the hydraulics and secures the gate. The evening run is not a rush; it is the final readiness check that lets the next morning start from a clean and zeroed scale.

The evening log records the condition of the deck, the status of the equipment and any item carried forward to the next operating day. That record closes the loop with the morning ticket bay round, so the yard passes from one shift to the next with no hidden work in progress and no unweighed scrap left exposed.

HOW THE PROCESS RUNS

From gate to gate in one measured line

The yard process is a single line with six stations. A vehicle arrives and is weighed at the ticket bay desk, where the load receives its identity. The magnet bay rounds then lift the material into the hopper in controlled passes. Heavy items pass through a shear check session before they reach the press, and the baler weeks turn the prepared scrap into dense blocks that are logged by the row. Scale house days reconcile the whole line against the paperwork, and yard run evenings close the yard clean.

Because each station writes into the same record, a customer can trace a delivery from the first weigh to the final load band. Nothing is started before it is measured and nothing leaves before it is checked.

Start with a ticket at the gate and end with a load band on the dock, with every stretch recorded in between.

READY TO WEIGH

Bring a load to the Wenjin yard

Tell us the material, the volume and the collection window, and we will confirm a slot that fits the baler and shear schedule. Reach the yard at metal@wenjinmetal.autos or call +16127785649.

Contact the yard team